What E000 Means
On a Bosch slide-in range, E000 says the control module and the user interface disagree about what appliance they are fitted to. The option code held in the control describes the configuration, gas or dual fuel, warming drawer or not, and when it does not match, the service manual states that no operation is possible. The documented remedy is entering the correct option code in service mode.
Common Causes of E000
- Option code missing after a control module was replaced
- Replacement board delivered with a default configuration for a different model
- User interface and control module mismatched during a repair
🔧 One Safe Check You Can Try
Cut power to the range at the breaker for two minutes and restore it. If E000 is still there, the option code needs setting with a value specific to your model, which is a service-mode step rather than something in the user menu.
⚠ Why You Shouldn't Go Further Than That
- A range option code carries the appliance's configuration, and an incorrect value can leave the oven running to a profile meant for a different model.
- With no operation possible there is nothing to test by trying, so the setting has to be right first time.
- On a gas range, work behind the control fascia means being alongside the gas valve and igniter wiring; the gas supply must be shut off at the appliance valve before anything back there is disturbed.
- This code usually follows earlier work on the range, so the cause is often a step missed rather than a part failure.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.