What E207 Means
E207 is the lower cavity of a Bosch double wall oven refusing to unlock. The manual gives two documented reasons, the cavity being too hot for the control to release the door and the latch not operating as expected, and records that the attempt stops after one minute. The error clears once the latch is seen in the open position for more than ten seconds.
Common Causes of E207
- Lower cavity still above the release temperature
- Latch motor or position switch on the lower cavity failed
- Latch mechanism binding after a clean cycle
🔧 One Safe Check You Can Try
Wait until the lower cavity is completely cold before you go near the door, because a self-clean leaves it far hotter than a normal bake; only then is it sensible to cut power at the breaker for several minutes. Never lever or pry at a locked oven door.
⚠ Why You Shouldn't Go Further Than That
- A self-clean cycle takes the cavity well above 800 degrees Fahrenheit, and the inner door stays dangerously hot long after the display looks calm.
- The latch shares its circuit with heating components, so live testing is a shock risk on top of a burn risk.
- Damage from levering a stuck door is permanent and affects sealing during ordinary cooking.
- On a stacked double oven the lower latch is the harder of the two to reach, and access may affect what is still covered on a newer appliance.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.