Low Risk - DIY Check OK

Bosch Washer Er:20 Error Code

Er:20 on a Bosch front-load washer records the spin being abandoned. Both service documents give the same first cause, a load too unbalanced to spin safely, and both add a second: a failing wire harness, or on the Vision platform…

What Er:20 Means

Er:20 on a Bosch front-load washer records the spin being abandoned. Both service documents give the same first cause, a load too unbalanced to spin safely, and both add a second: a failing wire harness, or on the Vision platform a loss of communication with the inverter during the spin. So it is usually the laundry and occasionally the wiring.

Common Causes of Er:20

  • Load unevenly distributed, often a single heavy item
  • Machine not level so the drum cannot settle
  • Wire harness to the motor drive failing

🔧 One Safe Check You Can Try

Open the door and redistribute the load, mixing large and small items rather than washing a single heavy item like a bath mat or a duvet on its own. Then run a spin-only program and see whether it completes.

⚠ Why You Shouldn't Go Further Than That

  • A machine that spins an unbalanced load at full speed hammers its own bearings and suspension, which is why the control refuses.
  • Leveling a washer properly means adjusting all four feet and locking them, not wedging one corner.
  • If redistributing does not help, the remaining cause is motor-drive wiring, which is behind the cabinet panels.
  • Repeatedly forcing a spin on a load that will not balance shortens the life of the drum bearings noticeably.

Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.

Technical Reference

Code
Er:20
Appliance
BOSCH washer
Checked
September 2026

Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with BSH Home Appliances Corporation.

Other Washer Error Codes

Related Guides

Behavior Not Matching What's Described Above?

If Er:20 is showing up earlier than expected, coming with other warning signs, or you're just not sure, book a trained technician for a proper diagnosis.

Book Repair for Er:20

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 936-3182 now

FAQ

Er:20 FAQ

A single heavy item soaks up water and settles to one side. The drum cannot balance it, so the control stops rather than spin an eccentric load.

Usually not. It is most often a loading matter. A machine that reports it on every load, including mixed ones, is worth looking at.

Need a repair? We're ready to help. Call Now
Call Us Schedule