What dr:15 Means
dr:15 on a Bosch Vision front-load washer is the warning stage of the power limiter, logged when the motor is drawing close to the limit without yet crossing it. Bosch gives it the same causes and the same remedies as the switch-off version, a heavy load or mechanical friction, with the suspension system and the door gasket named as places to look.
Common Causes of dr:15
- Loads consistently at or above capacity
- Early bearing or suspension wear adding friction
- Door gasket starting to rub the drum
🔧 One Safe Check You Can Try
Treat this as an early prompt. Reduce load sizes for a few washes and, with the machine off, turn the empty drum by hand and listen. Catching friction at the warning stage is far cheaper than catching it after the drive shuts down.
⚠ Why You Shouldn't Go Further Than That
- A warning is a chance to act before the drive starts cutting out, and that value is lost if it is reset and ignored.
- The remedies point into the suspension and the tub, which is not a place to explore speculatively.
- Bearing wear that is caught early is a different job from bearing failure that has scored the shaft.
- A rubbing gasket wears through from the inside, and the first visible sign is usually water on the floor.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.