Medium - Inspection Needed

Bosch Microwave E1 Error Code

E1 on a Bosch built-in speed microwave oven means the thermistor circuit is reading open. The service manual notes the behavior precisely: the appliance reverts to plug-in mode and displays the code for three seconds. The thermistor is the temperature…

What E1 Means

E1 on a Bosch built-in speed microwave oven means the thermistor circuit is reading open. The service manual notes the behavior precisely: the appliance reverts to plug-in mode and displays the code for three seconds. The thermistor is the temperature sensor the oven relies on for its convection and combination functions, so an open circuit there takes those modes out of use.

Common Causes of E1

  • Thermistor failed open
  • Broken wire or loose connector in the thermistor circuit
  • Input module problem reading the sensor

🔧 One Safe Check You Can Try

Switch the appliance off at the breaker for two minutes and back on, which is worth one attempt for an intermittent connection. Do not open the housing: the high-voltage capacitor inside a microwave can hold a dangerous charge even after it is unplugged.

⚠ Why You Shouldn't Go Further Than That

  • The high-voltage capacitor in a microwave stores a charge that remains dangerous after the appliance is disconnected, and it must be discharged by someone trained to do it.
  • The thermistor sits in the cavity airflow near the convection heating parts, which is not an area to explore.
  • Bosch's troubleshooting works through the input module as well as the sensor, and only one of those is a cheap part.
  • Built-in speed ovens are trimmed into cabinetry, so removal without the right method damages the surrounding units.

Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.

Technical Reference

Code
E1
Appliance
BOSCH microwave
Checked
September 2026

Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with BSH Home Appliances Corporation.

Other Microwave Error Codes

Related Guides

Still Seeing E1?

Book a trained technician and get it diagnosed correctly the first time — no guesswork, no repeat visits.

Book Repair for E1

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 936-3182 now

FAQ

E1 FAQ

The state the appliance reverts to, as if it had just been connected to power. The service manual describes the oven falling back to it when this problem is detected.

The thermistor is used for convection and combination cooking, so straight microwave heating is often unaffected, but the appliance should still be checked.

Need a repair? We're ready to help. Call Now
Call Us Schedule