What E:01 Means
On the 2015-and-newer Bosch platform that writes its codes with a colon, E:01 is raised when the control cannot verify the heat pump heater relay or the two pump circuits, and the wash cycle ends early rather than continuing. Bosch's problem chart lists three triggers: a failed heater relay inside the power module, a heat or drain pump that is disconnected or electrically failing, and supply voltage that sags too far while the machine is loaded. This is a different problem from the short-form E01 used on earlier Bosch dishwasher generations, which is documented separately.
Common Causes of E:01
- Heat pump heater relay failed inside the power module
- Heat pump or drain pump disconnected, or its harness damaged
- Supply voltage sagging below the range the control accepts
🔧 One Safe Check You Can Try
Check that the dishwasher has its own dedicated circuit and that a garbage disposer or microwave is not sharing it, since Bosch names supply voltage drop as a genuine trigger for this code. Relay and pump-winding measurements are bench work and go beyond a safe homeowner check.
⚠ Why You Shouldn't Go Further Than That
- The power module sits in the base of the machine under the tub, so every relay measurement starts with pulling a wet appliance that is screwed to the countertop.
- Bosch's chart asks for pump winding resistance figures specific to the exact pump fitted; without them a healthy pump reads as a failure and gets replaced for nothing.
- Supply voltage and a failing pump produce the identical display, and guessing between them is how owners end up paying for a module they did not need.
- Base-panel work of this kind may affect what is still covered on a newer machine, so check your warranty terms before you start.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.
Technical Reference
- Code
- E:01
- Appliance
- BOSCH dishwasher
- Maker documentation
- BOSCH owner manuals and use & care guides
- Checked
- September 2026
Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with BSH Home Appliances Corporation.