What E23 Means
E23 (also shown as F23) means the AquaStop leak-protection hose has been triggered, indicating the system has detected a possible water leak and shut off the water supply as a precaution.
Common Causes of E23
- An actual water leak from a hose, seal, or valve
- A damaged AquaStop hose triggering a false alarm
- A failed water inlet valve
🔧 One Safe Check You Can Try
Turn off the water supply valve behind the washer immediately, and check the floor and surrounding area for visible water — do not attempt to reset and rerun the cycle.
⚠ Why You Shouldn't Go Further Than That
- This code exists specifically to stop an active leak — bypassing it before the cause is confirmed risks a flooded laundry room or the floor below it.
- The AquaStop float mechanism is designed to be difficult to reset without the right tool, and forcing it can damage the hose permanently.
- A leak at the water inlet valve can be under line pressure; disconnecting it without shutting off the supply first can spray water into the machine's electronics.
- Continuing to run cycles while investigating this yourself risks further water damage — check with your insurer about how a gradual leak like this is treated before assuming it is covered.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.
Technical Reference
- Code
- E23
- Appliance
- BOSCH washer
- Maker documentation
- BOSCH owner manuals and use & care guides
- Checked
- September 2026
Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with BSH Home Appliances Corporation.