Medium - Inspection Needed

Bosch Washer Er:15 Error Code

Er:15 on a Bosch Nexxt front-load washer means the pressure sensor is returning a voltage the control recognizes as invalid. That sensor is how the machine knows how much water is in the drum, reading the pressure in a small…

What Er:15 Means

Er:15 on a Bosch Nexxt front-load washer means the pressure sensor is returning a voltage the control recognizes as invalid. That sensor is how the machine knows how much water is in the drum, reading the pressure in a small air tube that runs from the tub to the sensor. Bosch names the sensor or its wire harness as the cause.

Common Causes of Er:15

  • Pressure sensor failed
  • Wire harness to the sensor failing
  • Air tube to the sensor blocked, split or detached

🔧 One Safe Check You Can Try

There is no home measurement, but note whether the machine has been over- or under-filling, or refusing to spin. All three follow from a water level the control cannot read, and the pattern is useful to report.

⚠ Why You Shouldn't Go Further Than That

  • The sensor and its air tube sit at the top of the cabinet under the worktop, where the tube can be knocked off without being seen.
  • A tube that has filled with water or detergent residue gives a wrong reading with a perfectly good sensor on the end of it.
  • Bosch's test program drives the pressure system with the machine running, which means working around a filling drum.
  • Replacing the sensor when the harness or the tube was to blame leaves the same code with a new part fitted.

Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.

Technical Reference

Code
Er:15
Appliance
BOSCH washer
Checked
September 2026

Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with BSH Home Appliances Corporation.

Other Washer Error Codes

Related Guides

Still Seeing Er:15?

Book a trained technician and get it diagnosed correctly the first time — no guesswork, no repeat visits.

Book Repair for Er:15

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 936-3182 now

FAQ

Er:15 FAQ

It tells the washer how much water is in the drum. Fill level, detection of an empty drum and the decision to start spinning all depend on it.

It can. A control that cannot confirm the drum has drained will not start a high-speed spin, which is a protection rather than a problem in the motor.

Need a repair? We're ready to help. Call Now
Call Us Schedule