What Er:06 Means
Er:06 on a Bosch front-load washer is the shorted version of the temperature sensor problem: instead of reading nothing, the circuit reads as a dead short. Bosch's documented causes are a damaged NTC or a short circuit in its cable, and the remedies are to rectify the cable short or replace the sensor. A shorted sensor reads as an impossibly high temperature, so the control refuses to heat.
Common Causes of Er:06
- NTC sensor internally shorted
- Sensor cable shorted against the tub or chassis
- Corrosion bridging the sensor terminals
🔧 One Safe Check You Can Try
No safe home measurement exists here. What helps is noting whether the machine refuses to heat at all rather than heating inconsistently, since a shorted sensor produces a clean refusal rather than erratic behavior.
⚠ Why You Shouldn't Go Further Than That
- A short in a cable running beside the heating element is worth tracing properly rather than working around.
- The sensor and the element share a mounting at the bottom of the tub where water and detergent residue collect.
- Bosch's remedy list puts the cable before the sensor, and a new sensor fitted to a shorted cable behaves exactly like the old one.
- The rear panel has to come off with the machine pulled out, and on a stacked or built-under installation that is a two-person job.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.
Technical Reference
- Code
- Er:06
- Appliance
- BOSCH washer
- Maker documentation
- BOSCH owner manuals and use & care guides
- Checked
- September 2026
Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with BSH Home Appliances Corporation.