Medium - Inspection Needed

Bosch Washer Er:04 Error Code

Er:04 on a Bosch front-load washer means the control cannot drive the door lock correctly. Both service documents name the same part: the triac on the control module that switches the lock, described in one as a failing triac or…

What Er:04 Means

Er:04 on a Bosch front-load washer means the control cannot drive the door lock correctly. Both service documents name the same part: the triac on the control module that switches the lock, described in one as a failing triac or control module and in the other as a defective triac or a stuck door relay. The documented remedy in the Vision manual is to replace the control.

Common Causes of Er:04

  • Triac on the control module failed
  • Door relay stuck on the control board
  • Control module problem affecting the lock output

🔧 One Safe Check You Can Try

Cut power at the breaker for ten minutes and restore it, which is worth one attempt because a stuck output can sometimes release. If the code returns immediately, the problem is on the board and no amount of resetting will change that.

⚠ Why You Shouldn't Go Further Than That

  • The problem is on the board that switches mains voltage to the lock, which means a part that has failed while carrying line current.
  • Bosch distinguishes this from a lock or harness failure, so replacing the lock will not help even though the sign is about the door.
  • The control module in these machines sits behind the fascia, and its connectors carry both mains and low-voltage circuits side by side.
  • Boards are model and revision specific, and a fitted one is rarely returnable if it turns out to be wrong.

Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.

Technical Reference

Code
Er:04
Appliance
BOSCH washer
Checked
September 2026

Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with BSH Home Appliances Corporation.

Other Washer Error Codes

Related Guides

Still Seeing Er:04?

Book a trained technician and get it diagnosed correctly the first time — no guesswork, no repeat visits.

Book Repair for Er:04

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 936-3182 now

FAQ

Er:04 FAQ

The board. Bosch's own remedy for this code is to replace the control, because the failure is in the device that drives the lock rather than in the lock itself.

Because the visible sign is a door that will not lock or unlock. The difference is that the lock is healthy and the thing telling it what to do is not.

Need a repair? We're ready to help. Call Now
Call Us Schedule